Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reset your Holosun EPS Carry Red Dot sight to How to factory reset holosun eps carry red dot? its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few actions.

• Initially ensuring your red dot sight is activated.
• Identify the small reset button on the side of the device.
• Utilize a small object to activate the reset lever for approximately 7 milliseconds.
• Let go the reset button and your Holosun EPS Carry Red Dot sight will restart.
• Its red dot sight should now be set back to its factory settings.

Return to Your Holosun EPS Carry Red Dot toward Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to its factory configuration is a breeze. First, determine the tiny button on the rear of your optic. Then, sustain it for around twelve seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for accurate shooting.

restore Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

• Hold down the power button for approximately 5 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and verify your sight's functionality. If you encounter any further difficulties, don't hesitate to contactsupport team.

Revert Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• First, Energize your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, press the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Permit the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Reinitialize your Holosun EPS Carry through a Factory Default Settings

If your Holosun EPS Carry is acting up, a factory reset might be the solution. This will restore your sight to its factory settings, clearing any personalized configurations you've made. To execute this reset, follow these easy steps:

• First, locate the reset button on your EPS Carry.
• Secondly, use a thin object, like a paperclip, to activate the reset switch.
• As you keep the reset lever pressed, turn your EPS Carry.
• It will blink a message showing that the reset is finished.

Once the reset is complete, your EPS Carry will be back to its factory settings.

Report this wiki page